Hi there! I understand the Solos AirGo app isn’t adjusting properly after you paired your phone with the glasses. To get a clearer picture, could you tell me what exactly you mean by “not adjusting”? For example, is the app not responding to input changes, or the display/settings on the glasses not reflecting the changes you make in the app? Any specific behavior you’ve noticed will help me guide you better.

Meanwhile, here’s a general approach to troubleshoot this kind of issue:

1. First, make sure your Solos AirGo smartglasses are fully powered on and paired correctly with your phone. Check Bluetooth settings to confirm the connection. The LED on the glasses should flash blue once paired.

2. Restart both your glasses and your phone. Sometimes a simple restart can reset communication between devices.

3. Within the Solos AirGo app, try disconnecting and reconnecting your device to prompt a fresh sync.

4. Check for any app updates in your app store and install any available updates asap.

5. Try adjusting the sensitivity or desired settings within the app again. According to the official guides, you can do this by opening the app while connected and adjusting sensitivity or other controls there.

6. If the app still doesn’t reflect changes on the glasses, consider resetting the glasses by pressing and holding the virtual button for 10 seconds to reset them, then re-pairing with your phone.

If you want, I can also guide you step-by-step through these actions. Let me know what you’ve tried so far or if you see any error messages in the app.

Are you satisfied with this initial guidance?