Hi there! I understand you’re having trouble with CamHipro not connecting and the wireless settings won’t open. Could you share a bit more about what you’ve tried so far? For example, are you accessing the wireless settings via the app on your Windows device? Also, is the camera powered on and within range of your Wi-Fi network? This info will help me guide you better.

In the meantime, here’s a general step-by-step approach we can try:

1. Restart the CamHipro app on your Windows device to refresh its connection.
2. Ensure your Windows 10 device is connected to the same 2.4 GHz Wi-Fi network that your camera uses, since many cameras don’t support 5 GHz Wi-Fi.
3. If the wireless settings won’t open in the app, try closing the app completely and reopening it, or reinstalling it.
4. Power cycle your camera by unplugging it for about 10 seconds and then plugging it back in.
5. If the camera still won't connect and the app's wireless settings remain inaccessible, consider performing a factory reset on the camera. Usually, there’s a physical reset button on the camera you can press and hold for about 10-15 seconds. This erases previous Wi-Fi settings and allows you to start fresh3 10.
6. After resetting, try connecting again by following the setup instructions: connect your phone or PC to the camera’s hotspot and then configure Wi-Fi within the app8.

Let me know if any of these steps helped or if you need more detailed guidance on any part!