Hi! Thanks for reaching out about the “Please speak” mic button showing up in your BTECH UV Programmer Android app but the transmitter not activating. I want to help get this working for you.

To better assist, can you first confirm these details for me?
- Which Android device and OS version are you using?
- Are you connected to the BTECH UV-Pro radio via Bluetooth or another method?
- Does the app show that it’s successfully paired or connected to the radio?
- Have you granted microphone and Bluetooth permissions to the app in your phone’s settings?
- Have you tried pressing and holding the mic button any specific way?

From my experience, this issue generally comes down to either Bluetooth connection or permission settings that prevent the app from actually activating the transmitter.

Here’s a step-by-step you can try:
1. Check Bluetooth Connection:
- Make sure your phone’s Bluetooth is on and that the UV-Pro shows as connected in your phone’s Bluetooth settings.
- If not connected, try removing (forgetting) the device and pairing again freshly.

2. Grant Permissions:
- Go to your phone’s Settings > Apps > BTECH UV Programmer > Permissions and confirm that Microphone and Bluetooth are both allowed.
- If not granted, enable them and restart the app.

3. Test the Mic Button:
- Open the app, ensure the radio is connected via Bluetooth, then tap and hold the green mic button. The button usually lights up and says “Please speak.”
- Speak clearly into the phone mic or connected device mic.
- Release the button after speaking to end transmission.

4. Check Radio Settings:
- Confirm that your UV-Pro radio is powered on, with volume turned up and not muted.
- Sometimes, radios have separate settings for allowing external mic/PTT control via Bluetooth; check if this is enabled in the radio’s menu (refer to the UV-PRO manual if needed).

If after trying these steps the transmitter still doesn’t activate, it could be helpful to restart both the phone and the radio, or reinstall the app to clear any glitches.

One report on a similar problem mentioned keying was detected on other radios but audio did not transmit—this can also indicate issues with microphone activation or app-radio communication1.

Please let me know what you find and if any error messages pop up. We can dig deeper if needed!

Are you satisfied with these steps to try so far?

Samsung Galaxy S23FE - Android 15 - yes, Bluetooth active - controlling radio except app not invoking xmt

Thanks for the details about your Samsung Galaxy S23FE running Android 15, with Bluetooth active and controlling the radio, but the app not invoking transmission. That definitely narrows it down.

There have been reports of Bluetooth-related issues specific to Samsung devices updated to Android 15. Some users have experienced problems with Bluetooth connections, device pairing, or apps not fully communicating with paired devices after the update1 4.

Given this context, here are some targeted steps you can try to resolve the issue where the “green mic” button triggers “Please speak” but the radio transmission does not start:

1. Enable Developer Option for Bluetooth LE Devices
- Go to Settings > About phone and tap Build number 7 times to enable Developer Mode.
- Then go to Settings > Developer options and look for "Show unsupported Bluetooth LE devices" (LE = Low Energy). If it’s off, enable it. This has helped some users get their radios properly detected and controlled by apps on Android 15 Samsung phones5.

2. Toggle Airplane Mode On and Off
- Sometimes toggling Airplane Mode on for 10 seconds then off clears Bluetooth stack issues on Samsung phones after recent updates6.

3. Restart Both Devices
- Power off your Galaxy S23FE and the BTECH UV-Pro radio, then power on the radio first and your phone second before reconnecting Bluetooth.

4. Clear App Cache and Data
- Go to Settings > Apps > BTECH UV Programmer > Storage and clear cache (or data as a last resort). Then restart the app and try again.

5. Test in Safe Mode
- Boot your phone into Safe Mode (hold volume down + power until reboot, then release power but keep volume down) to check if a 3rd party app might be conflicting with Bluetooth operation7. If transmission works there, a background app may be causing the issue.

6. Check for App Updates or Firmware Updates
- Ensure your BTECH UV Programmer app is the latest version from the Play Store.
- Verify if your UV-Pro radio firmware has any updates from BTECH’s official channels.

If these steps don’t resolve the transmission issue, please let me know what happens at each step. We can also look into any logs or settings inside the app that might highlight connection problems.

Do you want me to guide you through any of these steps in detail? Are these suggestions clear so far?

Instructions are clear; Prompted for several android updates to Android 16, so doing these, first

Great to hear you’re updating to Android 16 first—that’s often a good move since OS updates often include Bluetooth and app compatibility fixes.

Regarding detailed instructions specifically for the BTECH UV Programmer app with Android 16, there isn’t an official dedicated update guide yet. However, based on recent BTECH app and firmware update practices, here’s what I recommend for smooth operation after your Android upgrade:

1. Update the UV Programmer App:
After upgrading to Android 16, make sure you have the latest version of the BTECH UV Programmer app from the Google Play Store. Updated versions often include fixes for new OS compatibility.

2. Re-Pair Your Radio:
It’s best to remove the old Bluetooth pairing for the UV-PRO radio from your phone’s Bluetooth settings, then pair fresh through the app—this cleans out any stale connection data that can cause communication issues.

3. Check for Radio Firmware Updates:
Visit the official BTECH firmware update page or look inside the app’s firmware update section to ensure your UV-PRO radio firmware is up to date. New firmware versions often improve Bluetooth interoperability with newer Android versions2 3.

4. Grant Necessary Permissions Again:
Major Android upgrades sometimes reset app permissions. Double-check that the app has all necessary permissions including Bluetooth and Microphone, as these are essential for transmission control.

5. Restart Devices:
After all updates and re-pairing, fully restart both your Android device and the UV-PRO radio to finalize any Bluetooth handshake and app setting resets.

For additional help setting up or updating, here’s a helpful walk-through video for app and radio setup that, while not Android 16 specific, covers most workflow steps: Setting Up UVProgrammer app on Android1.

If any problems persist after your update and these steps, please let me know! We can look into further troubleshooting or verifying app logs and radio settings.

Are you satisfied with this guidance for your Android 16 update and BTECH UV Programmer app?

Attempted various remedies - implemented video configs - still no mic transmit from app - where is log located? Thanks for all of your help!

Hi! I’m glad you followed through with the steps and video configurations. Since you’re still not getting mic transmit from the BTECH UV Programmer app, checking the app’s logs can definitely help diagnose what’s happening under the hood.

For the BTECH UV Programmer app on Android, log files are not exposed directly to the user via the app interface or a visible folder. However, you can retrieve app logs using Android’s debugging tool called Logcat, which requires:

1. Enabling Developer Options and USB Debugging on your phone
- Go to Settings > About phone > Tap “Build number” seven times to enable Developer Options.
- Then Settings > Developer Options > Enable “USB Debugging.”

2. Using Android Debug Bridge (ADB) on your PC
- Install ADB as part of the Android SDK Platform Tools from Google’s developer site.
- Connect your phone to your PC via USB cable.
- Open a command prompt/terminal and run adb logcat to start seeing system and app logs in real time.
- You can filter logs related to the BTECH UV Programmer app by using something like:
<br> adb logcat | findstr "btech"<br>
on Windows or
<br> adb logcat | grep btech<br>
on Linux/Mac, assuming the app logs use “btech” as a tag or keyword.

This process will show log output including errors or warnings when you press the mic button but no transmission occurs. It’s a bit technical but is the most direct way to get app debug info.

If this is more technical than you want to dive into, you can also:
- Take note of any error messages in the app if visible, or
- Capture a screen recording or screenshots to share with official BTECH support at [email protected] for deeper debugging.

Additionally, since mic transmit is tied to Bluetooth communication and permissions, double-check your phone’s logs or any permission prompts that might be missed.

To summarize:
- App logs are not stored in a user-accessible file or folder on Android.
- Use ADB logcat via developer tools for detailed troubleshooting logs.
- Otherwise, reach out to BTECH support with detailed info and any screenshots/videos you can provide.

If you want, I can guide you step-by-step how to use ADB and gather logs. Would you like to proceed with that?

Are you satisfied with this explanation and next steps?