Hi there! I understand that your Liberty Player app on your Mac is stopping audio playback every 10 seconds even while your foot pedal is still pressed. Let's see if we can get this sorted out together.

First, can you tell me a bit more about your foot pedal setup? For example, is it a USB pedal, and have you configured it in the Liberty Player settings? Sometimes playback interruptions like this can be due to how the foot pedal is mapped or recognized by the app.

Here’s a step-by-step approach to troubleshoot this:

1. Check Foot Pedal Configuration:
- Make sure your foot pedal is properly connected via USB.
- Open Liberty Player, then go to View > Options > Foot Control and review the pedal settings. Ensure your pedal is correctly assigned to control playback, and that there aren't any settings causing intermittent pauses.

2. Inspect Play/Pause Feature:
- The Liberty Player has a “Play/Pause/Play” feature that can cause playback to pause intermittently. It’s designed for typists to catch up but might activate unintentionally.
- Try disabling that feature or adjusting its timing settings to see if that stops the audio from cutting off every 10 seconds.

3. Check Playback Channels:
- Verify that all audio channels are selected for playback. Sometimes limited channel selection can cause interrupted audio.
- You can find this setting in the playback options.

4. Test Playback without the Pedal:
- Play some audio using the mouse controls instead of the pedal.
- If the same issue doesn’t occur, it points towards a pedal configuration or hardware issue.

5. Reset and Reinstall:
- If the problem persists, consider reinstalling the Liberty Player app to reset any corrupted settings.

Let me know if you’ve tried any of these already or if you want me to walk you through the pedal configuration steps precisely. We’ll get your playback smooth again!

Are you satisfied with this initial guidance?