Hi! I see you’re having trouble connecting to your Egg Genius with the app on your iPhone. Let’s get this sorted out together. To start, could you tell me a bit more about the issue? For example:

- Are you unable to connect to the Egg Genius device’s WiFi at all?
- Is the Egg Genius LED light blinking, and if so, is it blinking slowly or quickly?
- Have you tried restarting the Egg Genius or your phone already?

Knowing these details will help me guide you better. Meanwhile, here are some basic steps that usually help:

1. Check the Egg Genius LED status:
The device should be in “access point” mode for initial setup—this is usually indicated by a slow blinking LED (once per second). If it’s blinking fast, it's in “station mode” trying to connect to your home WiFi network, which might cause connection issues during setup.

2. Power cycle the Egg Genius:
Unplug it from power, wait about 30 seconds, then plug it back in. Wait for the LED to stabilize in slow blink mode.

3. Connect your iPhone to the Egg Genius WiFi network:
On your iPhone, go to Settings > Wi-Fi, then look for a network named something like “Egg Genius” or “Flame Boss.” Connect to it directly because the app needs this connection to communicate with the device during setup.

4. Open the Flame Boss Egg Genius app and follow the prompts to complete the setup.

If you’ve done all this and still can’t connect, sometimes a factory reset on the Egg Genius can help clear connection problems. This usually involves pressing and holding a reset button on the device, but check your user manual for exact instructions.

One more thing: since your iPhone is running iOS 18.6.2, there shouldn’t be compatibility issues, but ensuring your app is updated to the latest version is always a good step.

Let me know what you’ve tried and what the current LED status is, and I'll guide you through more detailed troubleshooting if needed!

Are you able to see the Egg Genius WiFi network in your iPhone’s settings when the device is on?