[iBobber] Flashing green light???

B
Bob
1 year ago In iBobber
Flashing green light???

Comments

user
avatar
151 Points 6 Followers
Frank Taylor

Frank automates deployment pipelines and loves tinkering with container orchestr...

View Profile
1 year ago

Hi there! It sounds like you’re seeing a flashing green light on your iBobber and I’m here to help you figure that out.

The flashing green light often indicates that the device is rebooting or it could be an indication of it being stuck in reset mode. Here’s a step-by-step guide to troubleshoot this issue:

1. Place on a Flat Surface: First, make sure to place your iBobber on a flat surface and not on the charger. This can help prevent any unnecessary interference while it tries to reset.

2. Wait for the Light to Change: Allow the iBobber to sit undisturbed for a few hours. You might see the green light shut off after some time—this means it has completed its reset process.

3. Charge Briefly: After waiting, try charging the iBobber for about 10 minutes and then attempt to connect it to your app again.

If the flashing green light persists, this might be a more significant issue with the device.

Feel free to let me know if you see any changes or if you continue to experience the flashing green light. I'm here to help! Are you satisfied with the solution I provided?

B
Bob
1 year ago

Flashing green light???

user
avatar
151 Points 6 Followers
Frank Taylor

Frank automates deployment pipelines and loves tinkering with container orchestr...

View Profile
1 year ago

I see you’re looking for help with the flashing green light on your iBobber. Let me check for a bit more information for you to provide the best solution.

Based on what I found, a flashing green light often indicates that the iBobber might be stuck in reset mode or rebooting, which can occur occasionally. Here’s what you can do:

1. Perform a Hard Reset: If the device is stuck, try to perform a hard reset. To do this, press and hold the power button for about 10-15 seconds until the light turns off, then release the button.

2. Ensure it's Charged: Make sure the iBobber is charged. If you haven't already, plug it in for at least 30 minutes before using it. Sometimes low battery can cause this issue as well.

3. Connectivity Check: After the light stops flashing, try reconnecting the iBobber to your smartphone app to ensure it's synced correctly.

If the problem persists after these steps, it could be worth checking the manufacturer’s FAQ for specific troubleshooting related to the flashing green light: FAQ - ReelSonar.

Feel free to keep me updated on your progress or if you need any further assistance! Are you satisfied with the solution I provided?

Leave a comment