To resolve the issue with the Merlin Bird ID app where the filter won't switch from "All installed birds" to "Likely birds," but instead just cycles, follow these steps:

1. Restart the App: Force close the Merlin Bird ID app and reopen it. Sometimes, a simple restart can resolve minor glitches.

2. Check for Updates: Ensure that your app is updated to the latest version. Open the App Store, go to the updates section, and check if there's an update available for the Merlin Bird ID app. If an update exists, install it.

3. Access Explore Birds: Navigate to the "Explore Birds" section in the app. Look for the filter button located in the upper right corner of the screen.

4. Adjust Filter Settings: Tap the filter button and try selecting "Likely Birds" again. Sometimes, toggling between various options (like "Bird Packs") before switching to "Likely Birds" can help reset the filter selection process.

5. Check Location Settings: Ensure that location services are enabled for the Merlin Bird ID app. This allows the app to provide the most accurate bird list based on your current location.

6. Reinstall the App: If the issue persists, consider uninstalling and reinstalling the Merlin Bird ID app. After uninstalling, ensure you download it again from the App Store. This can fix any underlying problems with the app.

7. Data Connection: Make sure you have a stable internet connection. If you are experiencing connectivity issues, the app may not be able to switch filters properly.

8. Contact Support: If none of the above solutions work, reach out to the Merlin Bird ID support team. You can visit their help center for FAQs and support options at learn more.

By following these tailored steps, the problem with switching filters in the Merlin Bird ID app should be resolved.

Why is Merlin Bird ID app stuck on 'All installed birds'?

If your Merlin Bird ID app is stuck on "All installed birds," there are several possible reasons for this issue, along with actionable steps to resolve it.

1. Bird Pack Availability: Ensure that the appropriate Bird Pack is installed for your region. If the pack related to likely birds is not installed, the app may not be able to switch filters. Check the app’s settings and install any required packs - learn more.

2. App Update: Always make sure your app is up to date. Open the App Store, go to the updates section, and check if there’s an available update for the Merlin Bird ID app. If there is, install it and then try switching the filter again.

3. Restart the App: Sometimes, the app might just need a restart. Close the app completely and relaunch it to see if this resolves the issue.

4. Check Permissions: Ensure that the app has permission to access your location. A lack of permissions can prevent the app from switching filters accurately. Go to your iPhone settings, find Merlin Bird ID, and ensure that location services are enabled.

5. Reinstall the App: If the problem continues, uninstall the app and reinstall it. This can help clear any corrupted data that might be causing the issue. After reinstalling, log back in and check if you can change the filter from "All installed birds" to "Likely birds."

6. Connectivity Issues: Make sure you have a stable internet connection. A poor connection might hinder the app’s ability to switch options. Test your connection or switch between Wi-Fi and cellular data to see if it makes a difference.

7. Contact Support: If none of the above solutions work, consider reaching out to the Merlin Bird ID support team for further assistance. They may provide solutions specific to your situation - learn more.

Following these steps should help you address the issue of the app being stuck on "All installed birds."