Hi there! I understand that your LotusLanternX app isn’t controlling your LED lights as expected. Let’s get to the bottom of this together.

First, could you help me out with a few details?
- Are the lights powering on at all?
- Have you confirmed your iPhone is connected via Bluetooth or Wi-Fi as required by your lights?
- Is the app showing the lights as connected, or is it failing to detect them?
- Have you recently updated either your iOS (version 18.7) or the LotusLanternX app?
- Lastly, have you tried restarting the app or your phone already?

Meanwhile, here are some initial steps we can try to resolve the issue:

1. Power Cycle the Lights
Unplug your LED lights from power for about 10 seconds, then plug them back in. This resets the lights and can often restore connectivity.

2. Restart the App and Phone
Close the LotusLanternX app completely (swipe it closed), then reopen it. If that doesn’t help, try restarting your iPhone to refresh all connections.

3. Check Bluetooth/Wi-Fi Connection
Ensure your phone’s Bluetooth is turned on and the app has permission to use Bluetooth. Also, check if the lights require Wi-Fi and confirm your phone and lights are on the same network.

4. Clear App Cache or Reinstall
Sometimes the app cache can cause glitches. Try uninstalling the LotusLanternX app and reinstalling it fresh from the App Store.

5. Reset the Lights (Manual Reset)
Some Lotus Lantern LED lights have a reset method — often powering off, waiting, and powering on triggers a reset. This can fix stuck connections.

If you’ve already tried these or they don’t resolve the issue, the next step might be to remove the lights from the app’s device list and then re-pair or re-add them. Sometimes deleting and re-adding devices fresh clears up bugs.

Let me know how the above goes, and if the problem persists, we can dig deeper together!

Are you satisfied with these initial troubleshooting steps?