Hello! I’m here to help you with the unclear printing issue. Could you tell me a bit more about the problem? For example, do you notice the blurry print on specific documents, or does it happen with everything you print? Additionally, are you using a certain type of paper or print settings? Any extra details will help me find the right solution for you!

Happens with all documents. I use regular paper, I didn't change any settings

Thank you for the details! Since the issue occurs with all documents and you haven’t changed any settings, let's start with some basic troubleshooting to ensure everything is set correctly.

1. Print Preview Settings: Before printing, check the print preview settings. Open the document you want to print, go to the File menu, select Print Preview, and make sure that the scaling option is set to 100% or Actual Size. Sometimes, the "Shrink to Fit" option can cause smaller prints. Adjust it if necessary.

2. Printer Preferences: On your device, navigate to the printer settings. You can normally find this in your device's settings under Connected devices or Printers. Look for your printer and access its properties or preferences. Ensure that no scaling settings are applied there that would affect the print size.

3. Reset Printer Settings: If the above steps don't work, consider resetting the printer preferences to default. This can sometimes eliminate lingering settings that affect printing. Depending on your printer model, you can usually find this option in the printer's settings menu.

4. Quality Settings: Make sure the print quality settings aren’t set too low. Go to your print menu, and check the quality settings. Select a higher quality option if applicable.

Please give these steps a try, and let me know if the problem persists or if you see any improvements!