Hi! I see you’re experiencing intermittent recording with your FeatherSnapCam—only capturing a few minutes a day. Let’s get to the bottom of this together.

To start, could you tell me:
- Are you using the FeatherSnapCam on battery power or plugged in?
- Is your device’s app updated to the latest version?
- Have you checked your camera’s firmware version or if there are any pending updates?
- Also, what is the SD card status? (Capacity, brand, if formatted recently)
- Are you connected to a stable Wi-Fi network with good signal strength near your feeder?

Meanwhile, here’s a step-by-step outline we can try:

1. Check and update app and firmware:
Make sure your FeatherSnap app and camera firmware are up to date. Firmware bugs can sometimes cause intermittent recording.

2. Inspect SD card health and formatting:
Use a high-quality class 10 or better microSD card, preferably recommended by FeatherSnap. Format the card in the camera or through the app to ensure compatibility.

3. Verify Wi-Fi signal:
Weak or unstable Wi-Fi might cause gaps in recording as the camera uploads footage. Try moving your Wi-Fi router closer or use a Wi-Fi extender.

4. Adjust recording settings:
Check the app to ensure motion detection sensitivity is set appropriately, and the recording mode is correct (e.g., continuous or motion-activated).

5. Power supply:
If running on batteries, low battery level could cause intermittent operation. Make sure batteries are fresh or try connecting to a power source.

If you’ve tried any of these steps already, please let me know which ones so I don’t repeat, and I can guide you deeper. Also, if you experience any error messages or unusual app behavior, that info would help as well.

Looking forward to hearing back so we can fix this for you! Are you currently near your setup? I can help you walk through these checks.