Hi! I understand that your Lefant app is stuck on the WiFi connect page, and you want to bypass or troubleshoot this step. Just to clarify first: Are you trying to avoid connecting to WiFi entirely, or do you want to connect but the app is stuck and not progressing? Also, which Lefant device are you using (like a particular robot vacuum model)?

In the meantime, here are some initial steps you can take, since the Lefant app typically requires connection to a 2.4 GHz WiFi network for setup:

1. Check WiFi Band: Make sure your router is broadcasting a 2.4 GHz network, as Lefant devices usually don’t support 5 GHz WiFi.

2. Restart Device and App: Turn off your Lefant device, then turn it back on. Close the app on your Kindle, then reopen it and try again.

3. Forget and Reconnect WiFi: On your Kindle (Android 9), go to WiFi settings and forget your current network, then reconnect to ensure a clean connection.

4. Router Settings Check: Sometimes router settings like MAC filtering or firewall blocks interfere—ensure your device is not blocked.

5. Move Device Closer: During setup, place your Lefant device near your router for strong signal.

6. Reset Lefant Device: Try performing a factory reset on the Lefant device. Usually, holding the power button for a few seconds resets it (this varies by model).

Regarding bypassing WiFi setup completely, generally, the Lefant app won’t allow you to skip WiFi connection during initial setup because the app needs to communicate with the device to control it remotely. However, if you want to use the device without WiFi, please let me know the exact model, and I can check if there’s an offline mode or alternative control method.

Can you share what steps you’ve already tried and what Lefant model you have? That way, I can guide you more precisely!