Hi! I understand your MEATER app isn’t finding the thermometer on your iPhone 13 Pro, even though it worked fine on your iPod. Let’s get this sorted out together.

To start, could you confirm a couple of things for me?
- Is your MEATER probe fully charged and properly seated in its charger base?
- Have you tried restarting your iPhone 13 Pro and turning Bluetooth off and on again?
- Is your MEATER app fully updated to the latest version from the App Store?

Meanwhile, here’s a step-by-step approach that usually solves this kind of issue on iOS devices like your iPhone 13 Pro with iOS 18.6:

1. Ensure Bluetooth is enabled: Go to Settings > Bluetooth and toggle it on if it’s off.

2. Close and restart the MEATER app: Swipe up from the bottom of the screen and pause to see all open apps, then swipe the MEATER app off the screen. Reopen it fresh.

3. Forget any previously paired MEATER devices: In the MEATER app, go to “Add Device” or “Devices” section and remove any existing MEATER probes you see.

4. Restart your iPhone: Hold down the power button and volume up button together until the slide-to-power-off option appears. Slide to off, then power it back on after 30 seconds.

5. Re-pair your MEATER probe: Follow the MEATER app instructions to add your device again. Ensure the probe shows a green blinking light indicating it’s ready to pair.

6. Update Firmware if prompted: If the app finds the probe, it may ask to update the probe’s firmware—this helps with compatibility.

If after these steps the app still can’t detect your thermometer, it might help to:
- Remove the probe from its charger for about 30 seconds and re-insert it.
- Verify that no other Bluetooth apps or devices are interfering.
- Optionally, uninstall and reinstall the MEATER app.

Let me know where you are with these steps or if you ran into any challenges, and we can proceed from there!

Here’s the MEATER support page for pairing help if you’d like to glance over it: Pairing MEATER Plus