Hi! I understand that you’re having trouble getting video connection from the TSRC app on your device. To get us started, could you please tell me:

- What TSRC drone model and app version are you using?
- When you say no video connection, do you see a blank screen, or does the app say it’s connecting?
- Have you already tried anything to fix it, like restarting the drone, controller, or reinstalling the app?

This info will help me guide you through the right steps. Meanwhile, I can share some common fixes for TSRC app video connection issues:

1. Check WiFi Connection: Ensure your Android device is connected to the drone’s WiFi network. Usually, the drone broadcasts its own WiFi (e.g., “P70-VR” or similar). You need to connect your phone’s WiFi to this before opening the app to get video streaming.
2. Restart Devices: Power off your drone, controller, and phone. Then power them back on and try connecting again from the start.
3. Update or Reinstall the App: Make sure you have the latest TSRC app version installed in your Android 10 device browser environment, and if not, uninstall and reinstall it. Sometimes app glitches cause the video feed to not load.
4. Disable Airplane Mode Off: While some suggest airplane mode with WiFi on can help, I recommend just normal WiFi connected straight to the drone network.

If those don’t work, I can walk you through more advanced troubleshooting steps or check if the issue is specific to your drone model.

Would you like to try these steps first? And please share any details you have!

TSRC Q5 no video feed once booted up and calibration is done.

Thanks for confirming you’re using the TSRC Q5 and the video feed disappears after booting and calibration. Let’s dig a bit deeper to get your video back.

First, I want to check on something basic—are you connecting your Android device to the drone’s WiFi network immediately after powering on the drone and controller? The app needs that WiFi connection to stream video. If you connect later or use cellular data, the video won’t come through.

Assuming that’s correct, here are some tailored steps to try next:

1. Power Cycle All Devices:
Turn off the TSRC Q5 drone, controller, and your phone. Then power on the drone and controller first, connect your phone to the drone’s WiFi, and finally open the TSRC app. This sequence can often refresh connections and fix video issues.

2. Check App Permissions on Android:
Ensure the TSRC app has permission to access camera and storage on your Android 10 device. Go to Settings > Apps > TSRC app > Permissions and enable any permissions related to the camera or storage. Missing these can prevent video feed from displaying.

3. Check SD Card Status:
If your Q5 drone uses an SD card for video recording, a faulty or missing SD card can sometimes interfere with the camera feed appearing in the app. Remove and reinsert it or try another card if available.

4. App and Firmware Updates:
Confirm the TSRC app and your drone firmware are both up to date. If the firmware is outdated, some functions (including video feed) may not work after calibration. Check the TSRC website or app update section for the latest updates.

5. Try a Different Device:
Since you’re on an Android device, if possible, test the video connection on another phone or tablet to isolate whether the issue is device-specific or drone/app related.

If after these steps the video still does not appear post calibration, it might be an issue with the video transmitter or drone’s camera hardware.
Some users with similar symptoms reported video transmitter faults1 or app compatibility quirks2.

Would you like me to guide you through checking your drone’s firmware or assist you with app permission settings? Let me know how you’d like to proceed!

Is there a patch or update for TSRC Q5 video problems?

Thanks for asking about a patch or update for TSRC Q5 video problems. Based on recent reports from TSRC Q5 users, there doesn’t appear to be a specific official patch targeting video feed issues related to your problem. Some connection issues were reported after certain phone OS updates, but those mostly affected iOS users and were linked to firmware or app compatibility1,2.

However, the best way to ensure video performance on your Q5 is to:

1. Confirm you have the latest drone firmware installed. Updating drone firmware can fix camera and video transmission bugs. The TSRC official app or website should have firmware update instructions.
2. Keep the TSRC app updated to the latest version available in the Google Play Store or your trusted download source.
3. If you experience any disconnects or video loss after an update, it’s recommended to reboot all devices (drone, controller, phone) and reconnect carefully in the right order.

Since you’re on Android 10 via WebKit browser, also make sure the app has all necessary permissions enabled (camera, storage, WiFi) as we discussed earlier.

If problems persist despite all firmware and app updates, it could indicate a hardware issue like a faulty video transmitter in the drone, which typically requires repair or replacement.

Would you like me to guide you through checking your current firmware version and how to update it? That’s often the most crucial step to resolve these issues.