Hi! I see you’re having trouble with the PCH+ app on your iPhone. Could you tell me a bit more about what exactly is happening? For example, is the app not opening at all, are you seeing an error message, or is it freezing or crashing?

This detail will help me guide you with the best solution. In the meantime, I can suggest some initial troubleshooting steps based on the app issues common with iOS devices:

1. Restart Your iPhone: Sometimes a simple restart clears temporary glitches.
2. Check Internet Connection: Make sure your WiFi or cellular data connection is stable.
3. Force Close and Reopen the App: Swipe up from the bottom of the screen and pause in the middle to see open apps. Swipe the PCH+ app off the screen, then reopen it.
4. Check for App Updates: Go to the App Store, tap your profile picture at top right, and see if there’s an update available for PCH+.
5. Reinstall the App: If none of the above help, uninstall the app and then download it again from the App Store.

Since you’re using iOS version 26_3 — which I’m interpreting as iOS 16.3 or similar — these steps are applicable. If these don’t resolve the problem, we can try some deeper troubleshooting.

Could you please share if you see any specific error messages or behavior when trying to use the app? That’ll help me pinpoint better what to try next.

Pch app is still not working

Thanks for the update. Since the PCH+ app is still not working on your iPhone running iOS 26_3, let's try a few more focused steps tailored to this issue.

From recent reports with similar problems on iPhones (even iOS 17), users have seen error messages like "submit error code. Check WiFi and try again." This points to connectivity or app data issues specifically with PCH+ rather than device-wide problems3.

Here’s what I recommend next:

1. Check WiFi Connection and Settings
- Make sure your WiFi is stable, or try switching from WiFi to cellular data (or vice versa) to see if connection type affects the app loading.
- Reset your network settings by going to Settings > General > Transfer or Reset iPhone > Reset > Reset Network Settings. (Note: This will erase saved WiFi passwords, so you’ll need to reconnect after.)

2. Clear App Cache/Data
- Unlike Android, iOS does not provide direct cache clearing, so you’ll have to uninstall and reinstall the PCH+ app to clear its data fully. Since you mentioned trying reinstall already, double-check you are fully uninstalling first:
- Tap and hold the PCH+ app icon and select Remove App > Delete App.
- Restart your iPhone.
- Reinstall the app fresh from the App Store.

3. Ensure App Permissions Are Enabled
- Go to Settings > PCH+ and confirm the app has permission to use cellular data and any other relevant access (e.g., notifications).

4. Update iOS (if possible)
- If your device can update beyond iOS 26_3, updating may help fix compatibility glitches affecting the app.

5. Check for Regional Restrictions
- Sometimes app features are limited or unavailable based on region. Verify your App Store region matches where PCH+ is officially supported.

If after these steps the problem persists and you see any specific error codes or messages, please share those with me. Also, if the app is crashing immediately or showing a blank screen, that’s helpful to know.

If none of these resolves the problem, it might be linked to a temporary server or app backend issue. In that case, contacting PCH+ customer support directly or checking their official channels for updates could be the next step.

Would you like me to guide you through any of these steps in detail?