The blue flashing light on your Tris Home security camera is visible to the subject as it indicates activity like motion detection or network communication.

To turn off the blue light:

1. Check your camera settings in the Tris Home app.
2. Look for a setting called "Status LED" or similar under device or general settings.
3. If available, set the LED to "Always Off" or disable the status light.

If this option is not provided, you can try physically covering the light to minimize visibility without affecting camera function.

Keep in mind, the blue light often signals important statuses like motion detection, so disabling it might limit your awareness of camera activity. Adjusting placement or use of a cover is a common workaround if you need to hide the light.

1 want to turn the blue flashing light off.

To turn off the blue flashing light on your Tris Home device, follow these steps:

1. Open the Tris Home app on your phone.

2. Select your device from the device list.

3. Explore the device settings for any option related to LED indicators, status lights, or blue light.

4. If available, disable or turn off the blue status light.

If no such option exists in the app, the blue flashing light may be a default indicator that cannot be turned off through settings. In that case, you can try restarting the device or performing a factory reset by holding down the reset button for 5-10 seconds.

If you still want to eliminate the blue light, a physical cover over the light might be the only option. For detailed device setup and reset instructions, refer to the Tris Home user manual here: 1.